240v HERMS II (Heat Exchanged Recirculating Mash System) Home Brewery Controller by BREW-CONTROL at Conway Pub & Eatery. Hurry! Limited time offer. Offer valid only while supplies last. Our full HERMS II controller is two switched 120V pump outlets, a boil controller, a mash controller, and an independent switchable temperature
Product Description & Reviews
Our full HERMS II controller is two switched 120V pump outlets, a boil controller, a mash controller, and an independent switchable temperature display all in one housing. The boil controller and mash controller feed separate outlets. The boil controller and mash controller can't be on at the same time, making this controller safe to use with a 30 Amp dryer circuit. Our full HERMS II Controllers are available in 220/240V configuration only. These controllers are designed to manage the mash cycle of your HERMS tank as well as your boil. Two pump circuits are included, one for HERMS circulation and the other for transfer. The 120V pumps are independent of the PID (mash) controller and boil controller. Homebrewers also use these controllers for conventional (non-HERMS) breweries. In this configuration the Mash outlet would power your mash tun or RIMS tube while the boil outlet would still power your brew pot.
Features & Highlights
- Controller includes three separate Water Tight PT-100 RTD Sensor with 1/2" MPT Threads - includes 1/2" FPT Nylon lock nut and silicone washers. One for the PID controller and two switchable to a second temperature display.
- Includes a 12 foot 10 Gauge SJOOW Power Cord, 4 prong dryer plug, two 3 Prong twist-lock 240V outlets and two separately switched 120V Pump Outlets
- Controls up to two 5500 Watt 240V elements (one element at a time) and Compatible with GFCI breakers.
- Intended for a 240V HERMS brewery where one heating elements heats and manages mash temperature and a second element does final boil. One switch flips between PID controlled mash and full PWM boil control. Circulation pump outlets 1 and 2 are controlled by separate switches. Water resistant all aluminum housing.
Heating & Temperature Control
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by BREW-CONTROL, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
By Auber Instruments
The Auber CUBE 2S (CU002S) tabletop plug-n-play brewing controller has almost all the features you need for tabletop BIAB brewing. Powered by advanced EZboil DSPR320 controller, it can be used for step-mashing, boiling with timer, low oxygen brewing ...